Leaving Home for the Holidays? 10 Ways to Prevent Water Damage While Away

Suitcase packed, doors locked, lights on timers, and holiday plans officially underway. Everything seems taken care of, but what about the things that could go wrong while nobody's home?
A leaking supply line, a frozen pipe, or a sump pump failure might go unnoticed for days. And by the time you return, what started as a relatively small problem could have caused significant damage.
A slow plumbing leak can saturate cabinetry, seep beneath flooring, and reach wall cavities before anyone realizes something is wrong. During a Central Pennsylvania winter, freezing temperatures add another layer of risk, particularly for plumbing located in poorly insulated or unheated areas.
Whether you're traveling for Thanksgiving, Christmas, or an extended winter vacation, protecting your home requires more than locking the doors and lowering the thermostat. Understanding how to prevent water damage while away can help you identify potential plumbing and moisture problems before they turn into expensive surprises.

10 Essential Steps to Prevent Water Damage While Away
1. Keep. The. Heat. On. (Even When Nobody's Home)
Lowering the thermostat while you're away may reduce heating costs, but turning the heat off or setting it too low can expose your plumbing to freezing temperatures. A commonly recommended minimum setting during cold-weather travel is 55°F, although some homes require higher temperatures to adequately protect vulnerable pipes.
What many homeowners don't realize is that the temperature displayed on the thermostat isn't necessarily the temperature surrounding their plumbing. A pipe located inside an exterior wall, above an unheated garage, or in a poorly insulated crawl space may experience significantly colder conditions than the living areas of the home.
When water freezes inside a pipe, it can contribute to pressure buildup that damages the plumbing. The resulting leak may not become obvious until the ice begins to thaw. Maintaining sufficient heat throughout the home is especially important if you've experienced frozen pipes before or know certain areas are unusually cold.
2. Identify the Plumbing Most Vulnerable to Freezing
Not all plumbing faces the same level of freezing risk. Pipes running through heated interior spaces generally have better protection than those located near exterior walls or in areas where insulation and air sealing are inadequate.
Before leaving, pay particular attention to plumbing in garages, crawl spaces, attics, unfinished basements, and beneath sinks positioned against exterior walls. Pipes near basement rim joists or areas with noticeable drafts may also be vulnerable.
The concern isn't simply whether a space feels cold. It's whether the surrounding conditions allow the plumbing to remain above freezing when outdoor temperatures drop. A home can feel perfectly comfortable while concealed plumbing experiences much colder conditions.
If you know certain areas of your home are prone to drafts, cold or freezing, address those vulnerabilities before traveling. Depending on the situation, that may involve improving insulation, sealing air leaks, or ensuring adequate heat reaches the plumbing. For pipes beneath sinks, opening cabinet doors may help warmer indoor air circulate around the supply lines during particularly cold weather.
3. Consider Whether to Shut Off the Main Water Supply
One of the most useful questions to ask before an extended trip is whether shutting off the main water supply makes sense for your home.
A failed washing machine hose, toilet supply line, or other pressurized plumbing connection can continue releasing water as long as the supply remains active. When someone is home, the problem may be discovered relatively quickly. When the house is empty, water can continue flowing for hours or even days.
Shutting off the domestic water supply can help limit the amount of water released during certain plumbing failures. However, this isn't the right approach for every property. Some heating systems, fire suppression equipment, well systems, and other mechanical components may depend on an active water supply.
Before turning anything off, make sure you understand how your plumbing and mechanical systems operate. If you're uncertain, consult a qualified plumber.
Regardless of whether you shut off the water before traveling, every homeowner should know where the main shutoff valve is located and how to operate it. Discovering a plumbing emergency isn't the ideal time to begin searching for an unfamiliar valve.
4. Inspect Appliance Water Connections
Your plumbing system extends beyond the pipes hidden inside walls. Washing machines, refrigerators, dishwashers, and water heaters all have connections that can develop leaks over time.
Before leaving, take a few minutes to inspect these appliances for dampness, corrosion, staining, cracked or bulging hoses, and other signs of deterioration. Pay particular attention to water supply connections that remain pressurized even when the appliance isn't operating.
A washing machine doesn't need to be running for its supply hose to fail. Likewise, refrigerator water lines can develop leaks that remain unnoticed behind the appliance.
The resulting damage may extend well beyond the immediate leak. Water can travel beneath flooring, behind baseboards, and into adjacent rooms. If the appliance is on an upper floor, moisture may also reach the ceiling and walls below.
This is why an appliance leak that appears minor at first can involve a much larger affected area once the full extent of moisture intrusion is identified. Address questionable connections before leaving rather than assuming they'll last until you return.
5. Check Beneath Every Sink
Opening the cabinets beneath your kitchen and bathroom sinks might not seem like an important part of holiday preparation, but these enclosed spaces can conceal slow plumbing leaks.
Examine the supply lines, shutoff valves, drain connections, cabinet bottoms, and surrounding surfaces. Look for discoloration, swelling, dampness, water stains, or musty odors that may indicate moisture has been present.
Small leaks don't always create obvious puddles. Water can repeatedly contact cabinet materials, gradually causing swelling, deterioration, or damage to nearby surfaces. Particleboard and other moisture-sensitive materials are particularly susceptible to prolonged exposure.
If you notice dampness or staining, investigate the source before traveling. Simply wiping the area dry doesn't resolve an active leak, and leaving it unattended gives the problem more time to develop.
6. Make Sure Your Sump Pump Is Ready
If your basement relies on a sump pump to manage groundwater, checking that system before traveling should be a priority.
A sump pump removes water that collects in the sump basin, helping prevent groundwater from accumulating inside the basement. If the pump stops working because of a mechanical failure, power outage, stuck float switch, or blocked discharge line, water may eventually overflow into the surrounding area.
Before leaving, confirm that the pump operates properly, inspect the visible discharge arrangement, and check any battery backup or high-water alarm. Follow the manufacturer's testing instructions, or have the system inspected if you're unfamiliar with its operation.
Finished basements are especially vulnerable to sump pump failures. Water entering an unfinished basement may affect stored belongings, equipment, and exposed building materials. In a finished basement, that same water can reach flooring, drywall, insulation, trim, and concealed wall cavities.
The visible water is not always an accurate indication of how far moisture has traveled. Materials can absorb and retain water even after standing water has been removed, which is why early detection and an appropriate drying process are so important.
7. Disconnect and Winterize Exterior Water Connections
Outdoor faucets and garden hoses are easy to forget once temperatures begin dropping, but they can create problems during freezing weather.
Leaving a hose connected to certain frost-free faucets can prevent the plumbing from draining as intended. Water remaining inside the faucet assembly may freeze, expand, and damage the connection. Depending on where the damage occurs, the resulting leak could develop inside the wall rather than outside the home.
Before freezing weather arrives, disconnect garden hoses, drain and store them, and follow the appropriate winterization procedures for your exterior plumbing. Some systems have interior shutoff valves that must be closed, while irrigation systems may require separate winterization.
Don't assume that a faucet labeled frost-free is automatically protected under every condition. Proper installation, drainage, and maintenance still matter.
8. Address Existing Moisture and Humidity Problems
Not all water damage begins with a burst pipe or an overflowing appliance. Some moisture problems develop gradually through condensation, groundwater intrusion, inadequate ventilation, or existing building conditions.
If your home regularly experiences window condensation, damp basement conditions, musty odors, or attic moisture, those issues deserve attention before an extended trip.
During cold weather, warm indoor air containing moisture can reach colder building surfaces and cause condensation. Depending on where this occurs, moisture may accumulate on windows, inside attic spaces, or on concealed building components.
This can be particularly confusing because the resulting dampness or staining may resemble a roof leak or plumbing problem, even when the moisture originates inside the home.
Identifying the source of moisture matters more than simply addressing the visible symptom. Drying a damp surface or repainting a recurring stain won't solve a condition that continues producing moisture.
If your home already has an unresolved moisture issue, investigate the underlying cause rather than leaving it unattended during your trip.
9. Consider Water Leak Detection and Monitoring
Water leak detection technology can provide an additional layer of protection when nobody is home.
Depending on the system, moisture sensors can detect water accumulating near appliances, plumbing fixtures, water heaters, or sump areas. Whole-home flow-monitoring systems may identify unexpected water usage that suggests a plumbing leak.
Some devices send alerts directly to your smartphone, while more advanced systems can automatically shut off the water when certain conditions are detected.
These features can be valuable, particularly during extended travel, but they have limitations. A sensor only detects moisture within its monitoring area, and some devices depend on electricity, batteries, internet connectivity, or properly configured shutoff equipment.
An alert also doesn't stop damage unless someone responds or the system automatically takes action.
Before traveling, confirm that your monitoring equipment works, notifications are enabled, and someone can respond if a problem develops.
Leak detection is best viewed as an additional safeguard rather than a substitute for maintaining plumbing, controlling moisture, and inspecting vulnerable areas of the home.
10. Arrange for Someone to Check the House
Even with preventive measures and monitoring technology, having someone physically check your home can provide additional peace of mind.
For extended trips, consider asking a trusted friend, family member, or property caretaker to periodically walk through the house. Have them verify that the heat is working, inspect basement and sump areas, look beneath sinks, and check around appliances for unexpected moisture.
They should also watch for new ceiling stains, damp flooring, unusual plumbing sounds, or other conditions that weren't present before you left.
Make sure the person checking your home knows how to contact you and where the main water shutoff valve is located. If you have leak detection devices or sump pump alarms, explain what the alerts mean and who to contact if one activates.
A brief inspection may reveal a developing problem before it has time to affect additional materials.
What If You Return Home and Discover Water Damage?
Even careful preparation can't eliminate every possibility of a plumbing failure, power outage, or unexpected water intrusion. If you return home and discover water damage, the first priority is making sure the affected area is safe.
Water near electrical equipment, outlets, or wiring can create dangerous conditions. Sagging ceilings and visibly damaged building materials may also present hazards. Avoid entering unsafe areas and contact the appropriate professionals when necessary.
If it is safe to do so, stop the source of water by closing the appropriate fixture valve or main water supply. Once the immediate source is controlled, determining how far the moisture has spread becomes an important part of the response.
The Visible Water May Be Only Part of the Problem
One of the most common misconceptions about water damage is that the affected area ends where the visible water stops.
In reality, water can move through flooring seams, gaps around building materials, porous surfaces, and concealed cavities. Depending on the source, volume, and duration of the leak, moisture may extend beneath finished flooring, behind baseboards, into insulation, under cabinetry, or through ceilings and walls.
A floor can appear dry while moisture remains trapped beneath the surface. Likewise, drywall may look relatively unaffected even though water has reached materials behind it.
This is why evaluating the extent of moisture intrusion matters. Removing visible water is only one part of the process when moisture has reached building materials.
Why Proper Drying Matters
Towels, fans, and dehumidifiers may be sufficient for a small, clean-water incident affecting readily accessible, moisture-resistant surfaces. However, when water enters building assemblies or moisture-sensitive materials, more extensive evaluation and drying may be necessary.
The appropriate approach depends on several factors, including the water source, contamination level, length of exposure, materials involved, and ability of those materials to dry effectively.
Some materials can be successfully dried and restored. Others may require removal because of contamination, deterioration, or limitations that prevent adequate drying.
The goal of water damage mitigation isn't simply to make an area look dry. It's to identify the affected materials, address the moisture, and reduce the risk of additional damage.
When water has spread beyond a small, readily accessible area, professional assessment and mitigation can help determine the appropriate next steps.
Frequently Asked Questions
Should I turn off my main water supply when going on vacation?
Shutting off the main domestic water supply can help reduce the risk of extensive damage from certain plumbing leaks while you're away. If a pressurized supply line fails, closing the water supply may prevent it from continuing to release water.
However, some heating systems, fire suppression equipment, and other mechanical components require an active water supply. Before shutting off your water, make sure you understand how your home's plumbing and mechanical systems operate. Consult a qualified plumber if you're uncertain.
What temperature should I leave my house at during winter vacation?
A commonly recommended minimum thermostat setting during cold-weather travel is 55°F, although some homes may require higher temperatures to protect vulnerable plumbing.
Pipes located in exterior walls, crawl spaces, garages, and poorly insulated areas can experience temperatures significantly lower than the thermostat reading. If your home has a history of frozen pipes or known cold spots, additional precautions may be necessary.
Can pipes freeze even if the heat is on?
Yes. Keeping the heat on reduces freezing risk, but it doesn't guarantee that every pipe will remain protected. Plumbing located in unheated or poorly insulated areas may be exposed to significantly colder temperatures than the main living spaces.
Air leaks, inadequate insulation, and extreme outdoor temperatures can increase the risk. Identifying and addressing vulnerable plumbing before winter is more effective than relying exclusively on the thermostat setting.
Should I leave faucets dripping while I'm away in winter?
Allowing a small amount of water to flow can reduce freezing risk in certain plumbing situations, but it isn't a substitute for adequate heating, insulation, and proper winterization.
Leaving faucets dripping during an extended vacation also means allowing water to continue flowing while the home is unoccupied. If your plumbing is especially susceptible to freezing, consult a qualified plumber about the most appropriate precautions for your home.
Can water damage occur even if I shut off the main water?
Yes. Turning off the domestic water supply may limit damage from certain plumbing failures, but it won't prevent every type of water intrusion.
Roof leaks, groundwater intrusion, sump pump failures, exterior drainage problems, and other moisture sources can still affect the property. A thorough winter vacation checklist should account for these risks rather than focusing only on the plumbing supply.
Are smart water leak detectors worth having when traveling?
Leak detectors can be useful because they may identify unexpected moisture or water usage while nobody is home. Some systems send smartphone notifications, while others can automatically shut off the water.
Their effectiveness depends on proper placement, maintenance, monitoring capabilities, and whether someone can respond to an alert. They provide an additional layer of protection but don't eliminate the need for preventive maintenance or periodic inspections.
How long can a water leak go unnoticed in an empty house?
Without monitoring or periodic inspections, a water leak can continue for hours or days before anyone discovers it. The amount of damage depends on the flow rate, water source, duration, and materials affected.
Even relatively small leaks can cause significant problems when moisture repeatedly enters flooring, drywall, cabinetry, or concealed spaces. Detecting a leak early can help limit how far water spreads and how many materials are affected.
What should I do if I discover water damage after returning from vacation?
First, evaluate the safety of the affected area, particularly if water is near electrical equipment or has damaged ceilings or structural materials. If it is safe, stop the source of water to prevent additional damage.
Next, consider whether moisture may have spread beneath flooring, behind walls, or into other concealed areas. For water damage that extends beyond a small, readily accessible clean-water spill, a professional assessment can help determine the appropriate drying and restoration process.
Holiday Travel Shouldn't End With a Restoration Project
The last thing anyone wants after a holiday trip is to open the front door and discover water where it doesn't belong. Fortunately, many preventive measures are straightforward and can be completed before leaving.
Keeping adequate heat on, checking vulnerable plumbing, inspecting appliance connections, and confirming that your sump pump works can help reduce the risk of unexpected water damage. Taking time to address existing moisture problems and arranging for someone to check the property adds another layer of protection.
You can't control every plumbing failure, power outage, or winter storm. However, you can reduce the chances of a manageable problem becoming a much larger one simply because nobody was home.
Concerned About Water Damage in Your Home?
Water damage isn't always limited to what you can see. When moisture spreads beneath flooring, behind walls, or into concealed building spaces, determining the extent of the damage becomes just as important as addressing the original source.
1d Remedy provides water damage restoration and moisture-related services throughout Central Pennsylvania, including Harrisburg, Mechanicsburg, Camp Hill, Hershey, Carlisle, and surrounding communities.
Whether you've returned home to an unexpected leak, discovered moisture in your basement, or noticed signs of water damage that need further investigation, our team can help evaluate the situation and determine the appropriate next steps.
For urgent water damage situations, contact our emergency services team at 717-256-3891.



